Step 1 Place the foot pedal onto the base before placing the pole.

Stand Assembly Instructions

Regular Stand

The enclosed assebly instruction sheet applies to all regular and 3/4 form styles.

Please follow the 5 easy steps in sequence as displayed here.

Enjoy your form!

Step 2 Slide the spring onto the pole before inserting into the base.

Step 3 Make sure the tip of the foot pedal is right under the center hole of the base. The pole should sit on top of the foot pedal. Tighten the bolt.

Step 4 Place the body form onto the pole. Slide the pole through the body form, from the bottom up, into the hole at the top of the neck. Place the finial on the pole, and tighten the bolt. Step on the foot pedal while lifting the body form to the desired height.